Главная
/
Бренды
/
CASE-IH
/
Запчасти для разбрасывателей удобрений
/
CASE-IH (NTX5310) - CASE-IH APPLICATOR EQUIPMENT - PULL TYPE
/
PULL TYPE HYDRAULIC CYLINDER,Double Acting, 28.57mm Rod, 304.8mm Stroke (вариант 2)

PULL TYPE HYDRAULIC CYLINDER,Double Acting, 28.57mm Rod, 304.8mm Stroke (вариант 2)

PULL TYPE HYDRAULIC CYLINDER,Double Acting, 28.57mm Rod, 304.8mm Stroke

1 25325120

  • 25325120 - HYDRAULIC CYLINDER
  • Double Acting
  • 28.57mm Rod
  • 304.8mm Stroke 2-1/2 x 12
  • Кол-во: 1

2 25832510

  • 25832510 - SEAL KIT
  • Кол-во: 1

3 408043A1

  • 408043A1 - SPECIAL PIN 1
  • Cylinder
  • Кол-во: 1

CASE-IH (NTX5310) - CASE-IH APPLICATOR EQUIPMENT - PULL TYPE — другие схемы

16 Male ORB 16 Male ORB
16 Male ORB 16 Male ORB
16 Male ORB 16 Male ORB
28 NPTF 28 NPTF
PULL TYPE BAR ASSY. PULL TYPE BAR ASSY.
PULL TYPE CABLE TIE,.30" x 27 1/2" PULL TYPE CABLE TIE,.30" x 27 1/2"
PULL TYPE CAUTION DECAL PULL TYPE CAUTION DECAL
PULL TYPE CLEVIS,44.45mm OD x 164.08mm L PULL TYPE CLEVIS,44.45mm OD x 164.08mm L
PULL TYPE CYLINDER ASSY.,Double Acting, 38.1mm Rod, 609.6mm Stroke PULL TYPE CYLINDER ASSY.,Double Acting, 38.1mm Rod, 609.6mm Stroke
PULL TYPE DANGER DECAL PULL TYPE DANGER DECAL
PULL TYPE DISK HARROW PULL TYPE DISK HARROW
PULL TYPE ELBOW,90 Degree, 9/16"-18, 37 Degree x 9/16"-18, 37 Degree Fem Sw PULL TYPE ELBOW,90 Degree, 9/16"-18, 37 Degree x 9/16"-18, 37 Degree Fem Sw
PULL TYPE ELBOW,90 Degree, 9/16"-18, 37 Degree x 9/16"-18, 37 Degree Fem Sw PULL TYPE ELBOW,90 Degree, 9/16"-18, 37 Degree x 9/16"-18, 37 Degree Fem Sw
PULL TYPE FRAME ASSY PULL TYPE FRAME ASSY
PULL TYPE HUB ASSY. PULL TYPE HUB ASSY.
PULL TYPE HYDRAULIC CYLINDER PULL TYPE HYDRAULIC CYLINDER
PULL TYPE HYDRAULIC CYLINDER,Double Acting, 28.57mm Rod, 304.8mm Stroke PULL TYPE HYDRAULIC CYLINDER,Double Acting, 28.57mm Rod, 304.8mm Stroke
PULL TYPE HYDRAULIC CYLINDER,Double Acting, 31.75mm Rod, 254mm Stroke PULL TYPE HYDRAULIC CYLINDER,Double Acting, 31.75mm Rod, 254mm Stroke
PULL TYPE HYDRAULIC CYLINDER,Double Acting, 31mm Rod, 406.4mm Stroke PULL TYPE HYDRAULIC CYLINDER,Double Acting, 31mm Rod, 406.4mm Stroke
PULL TYPE HYDRAULIC CYLINDER,Double Acting, 31mm Rod, 406.4mm Stroke PULL TYPE HYDRAULIC CYLINDER,Double Acting, 31mm Rod, 406.4mm Stroke
PULL TYPE HYDRAULIC CYLINDER,Double Acting, 38.1mm Rod, 914.4mm Stroke PULL TYPE HYDRAULIC CYLINDER,Double Acting, 38.1mm Rod, 914.4mm Stroke
PULL TYPE JACK,40.1 mm L PULL TYPE JACK,40.1 mm L
PULL TYPE LAMP,5/32" x 1 1/4" PULL TYPE LAMP,5/32" x 1 1/4"
PULL TYPE LUBE NIPPLE,1/8" NPTF PULL TYPE LUBE NIPPLE,1/8" NPTF
PULL TYPE LUBE NIPPLE,1/8" NPTF PULL TYPE LUBE NIPPLE,1/8" NPTF
PULL TYPE LUBE NIPPLE,1/8" NPTF PULL TYPE LUBE NIPPLE,1/8" NPTF
PULL TYPE LUBE NIPPLE,1/8" NPTF PULL TYPE LUBE NIPPLE,1/8" NPTF
PULL TYPE LUBE NIPPLE,1/8" NPTF PULL TYPE LUBE NIPPLE,1/8" NPTF
PULL TYPE LUBE NIPPLE,1/8" NPTF PULL TYPE LUBE NIPPLE,1/8" NPTF
PULL TYPE MOUNTING PARTS PULL TYPE MOUNTING PARTS
PULL TYPE MOUNTING PARTS PULL TYPE MOUNTING PARTS
PULL TYPE MOUNTING PARTS PULL TYPE MOUNTING PARTS
PULL TYPE NOT SOLD SEPARAT PULL TYPE NOT SOLD SEPARAT
PULL TYPE NOT SOLD SEPARAT PULL TYPE NOT SOLD SEPARAT
PULL TYPE SHANK PULL TYPE SHANK
PULL TYPE TRIM PANEL PULL TYPE TRIM PANEL
PULL TYPE TUBE,0.563" ID, 0.875" OD, 4.06" Length PULL TYPE TUBE,0.563" ID, 0.875" OD, 4.06" Length
PULL TYPE TUBE,0.656" ID, 1" OD, 5.69" Length PULL TYPE TUBE,0.656" ID, 1" OD, 5.69" Length
PULL TYPE TUBE,0.656" ID, 1" OD, 5.69" Length PULL TYPE TUBE,0.656" ID, 1" OD, 5.69" Length
PULL TYPE TUBE,0.81" ID, 1.25" OD PULL TYPE TUBE,0.81" ID, 1.25" OD
PULL TYPE TUBE,0.812" ID, 1.5" OD, 5.5" Length PULL TYPE TUBE,0.812" ID, 1.5" OD, 5.5" Length
PULL TYPE TUBE,101.6 mm OD x 2339.9 mm L PULL TYPE TUBE,101.6 mm OD x 2339.9 mm L
PULL TYPE WARNING DECAL PULL TYPE WARNING DECAL

PULL TYPE HYDRAULIC CYLINDER,Double Acting, 28.57mm Rod, 304.8mm Stroke (вариант 2)

На странице «PULL TYPE HYDRAULIC CYLINDER,Double Acting, 28.57mm Rod, 304.8mm Stroke» представлена схема узла для техники Case IH из каталога «CASE-IH (NTX5310) - CASE-IH APPLICATOR EQUIPMENT - PULL TYPE». Здесь можно посмотреть расположение деталей на чертеже, сверить номера позиций, каталожные артикулы, наименования комплектующих и количество деталей, используемых в сборке.

Страница помогает точнее определить нужную запчасть перед заказом: найти деталь на схеме, сопоставить ее с номером в списке и уточнить, к какому узлу она относится. Такой формат удобен при ремонте, обслуживании и восстановлении техники Case IH.

Если нужную позицию сложно определить самостоятельно, специалисты «Интех» помогут подобрать запчасть по схеме, каталожному номеру, модели техники, фотографии узла или описанию неисправности.